Nuggets

Callas Rennsport MA1 Camshafts Installation & Timing

Callas Rennsport MA1 Camshafts Installation & Timing

Callas Rennsport MA1 Camshafts Installation & Timing Make sure you check TSI for the latest instructions! Turn the engine to 60° before TDC (BTDC) and pin the crank pulley at U3/6 with 9595/1. Please note: Camshafts are marked in German. Please note: The bank #2 Intake camshafts are shorter than bank #1. Please note: Do…

CR M97 Oil Seal Removal

CR M97 Oil Seal Removal

CR M97 Oil Seal Removal Run controller interrogation – check these items and print all: Any/All fault codes (MOST any DME fault code can cancel the procedure). Engine over-revs (NO range #1 or Range 4-6 over-revs allowed).  Valve train inconsistencies – Deviation= Actual vs. nominal (MAX 4.5°). Check DME Operating hours (take DME hours and…

Callas Rennsport M97 IMS Bearing Directive

Callas Rennsport M97 IMS Bearing Directive

Callas Rennsport M97 IMS Bearing Directive So you did extensive research on the Porsche IMS bearing failures and felt that you were safe to buy a 2005-2008 MY Porsche with the M97 equipped larger diameter IMS bearing. Yes, you were mostly correct, the larger diameter M97 IMS bearing is a much better choice, but it…

CR Tech IPAS or FAZIT DATA Collection

CR Tech IPAS or FAZIT DATA Collection

CR Tech IPAS or FAZIT DATA Collection Key Blade (IPAS): -Fill out NASTF documents with Driver’s License and Car Registration -Get IPAS Data from Dealer= Physical Code -Program Key Head (Alarm Remote and Door Locks)   No Key Blade (Smart Key 1 or 2-FAZIT): -Limited Physical Codes -Must have connection to PAG with either legitimate…

New Porsche Shop NEEDS

New Porsche Shop NEEDS

New Porsche Shop NEEDS   -PIWIS-3 Tester (Avoid the clone tools)   -Secondary scan tool EG PIWIS-2 clone   -Tertiary scan tool EG Autologic Blue or i-scan   -Power supply (100amps min)   -Porsche WM’s (Workshop Manuals)   -SIT’s (Service Information Technic) (new model intro books)   -Parts 24 (I like PET, the Porsche Parts…

CR Gear Oil Directive

CR Gear Oil Directive

CR Gear Oil Directive 356, 901 & 915 GEARBOXES Recommended Lubricants: Driven GO 75w-90 Motul 300 75w-90 Swepco 201 75w-90 Mobil-1 Delvac 75w-90   G50 and NEWER (1987-On including GT2, GT3 and Turbo) Anytime you change the gearbox oil in a G50 equipped car we have found where the G50 gearboxes are ultra-sensitive to the…